Hunter X-CORE Manual do Utilizador

Residential Irrigation ControllerOwner’s Manual and Programming InstructionsCompatible with Hunter Remotes and Solar SyncSEASONAL ADJUSTMENTWATER DAYS

8ACTIVATING THE BATTERYAfter installing your X-Core, make sure to remove the battery contact insulator to allow the X-Core to keep time in the event o

9CONNECTING A MASTER VALVENOTE: Complete this section only if you have a master valve installed in your irrigation system. A master valve is a “norma

10PSR SeriesPump Start Relay15 ft Minimum (4.5 m)To PumpST AR T TIMES SEASONAL ADJUSTMENTWATER DAYSALLMANUAL-ALL STATIONSSTART TIMESSYSTEM OFFCURRENT

11CONNECTING A HUNTER “CLIK” WEATHER SENSORA Hunter weather sensor or other micro-switch type weather sensors can be connected to the X-Core. The purp

12CONNECTING A HUNTER SOLAR SYNC ET SENSORThe X-Core is compatible with the Solar Sync and Wireless Solar Sync systems. Solar Sync is a sensor system

13CONNECTING A HUNTER SOLAR SYNC ET SENSORRegion For accurate Solar Sync measurements, the controller needs to be programmed for the average peak se

14CONNECTING A HUNTER SOLAR SYNC ET SENSORWater Adjustment  The Water Adjustment is a 1 to 10 scale that allows for easy adjustment of the Seasonal

15CONNECTING A HUNTER SOLAR SYNC ET SENSORCalibration/SetupAfter Solar Sync has been installed and programmed, it is recommended to allow the system t

16CONNECTING A HUNTER REMOTEConnecting to a Hunter Remote (not included)The X-Core Controller is compatible with Hunter Remote Controls (not included)

17NOTE: A basic programming rule is that whatever symbol or character is flashing will be the item programmed. For instance, if the hour is flashing whe

SEASONAL ADJUSTMENTWATER DAYSSTART TIMESSYSTEM OFFCURRENT TIME/DAYRUN TIMESACTIVESENSOR BYPASSRUNMANUAL-ONE STATION

18Setting the Program Start Time(s) 1. Turn the dial to the START TIMES position.2. The factory preset is set on program A. If necessary, you can s

19Selecting Specific Days of the Week to Water1. With the cursor on a specific day (the cursor will always start with MO), press the button to act

20PROGRAMMING THE CONTROLLERSetting Event Day(s) OffThe X-Core allows you to program a No Water Day(s). This feature is useful to inhibit watering on

21Seasonal Adjustment Seasonal Adjustment is used to make global run time changes without re-programming the entire controller. To use the Seasonal Ad

22PROGRAMMING THE CONTROLLERManually Run a Single Station 11. Turn dial to MANUAL – ONE STATION position.2. Station run time will flash in the disp

23ADVANCED FEATURESProgrammable Sensor OverrideThe X-Core allows the user to program the controller so that the sensor disables watering on only desir

24Easy Retrieve™ Program MemoryThe X-Core is capable of saving the preferred watering program into memory for retrieval at a later time. This feature

25TROUBLESHOOTING GUIDEProblem Causes SolutionsThe controller is continuously watering Too many start times have been programmedOnly one start time is

26TROUBLESHOOTING GUIDEProblem Causes SolutionsDisplay shows a station is running but the and icons are flashingThe sensor is interrupting irrigatio

27Problem Causes SolutionsSeasonal Adjust seems high •Regiontoolow•WaterAdjustmentsettingtoohighDecrease the value of the Water Adjustment set

X-CORE COMPONENTS ...2MOUNTING THE CONTROLLER TO WALL ...

28Operating Specifications• StationRunTimes:0to4hoursin1-minuteincrements• 3IndependentWateringPrograms• StartTimes:4perdayperprog

29Hunter Industries declares that the irrigation controller Model X-Core complies with the standards of the European Directives of “electromagnetic c

Hunter Industries Incorporated • The Irrigation Innovators © 2011 Hunter Industries Incorporated1940 Diamond Street • San Marcos, California 92078 USA

2X-CORE COMPONENTSTerminal block for -E (International models only)Note: Plug may look different from illustrationIndoor ModelOutdoor Model (Internal

3X-CORE COMPONENTS LCD Display1 Run Times Allows user to set each valve station run time from 1 minute to 4 hours2 Start TimesAllows 1 to 4 start time

4X-CORE COMPONENTS Wiring Compartment15 Lithium BatteryThe replaceable lithium battery (included) allows the controller to be programmed in the absenc

5X-CORE COMPONENTSDial SettingsRunNormal dial position for all controller automatic and manual operation Current Time/DayAllows current day and clock

6MOUNTING THE CONTROLLER TO WALLNote: The indoor version of the X-Core is not water- proof or weather resistant, and must be installed indoors or in a

7CONNECTING VALVES AND TRANSFORMERInstallation of the X-Core should only be done by trained personnel.1. Route valve wires between the control valve